Pool water treatment equipment of swimming pool hair collector

In the pool water treatment system, there is a not easily overlooked but important pool filtration equipment--Hair collector. Hair gatherer (hair filter) is mainly composed of receiver, barrel, filter basket, flange cover and fasteners, etc. The equipment can filter out solid waste in the water, play a pre-filtering role, but also protect the normal work of the subsequent pumps, sand tanks and other equipment.

Ollies Stainless Steel Hair Collector

With regard to hair collectors, the Technical Specification for Swimming Pool Water Supply and Drainage Engineering has relevant descriptive provisions:

I. Pool water in the entryPrior to purification of the filtration equipment, the pool water shall be pre-filtered by a hair aggregator and shall comply with the following provisions:

1, hair aggregators shall be installed on the suction pipe of each circulating water pump;

2,(coll.) fail (a student) When the circulating water pump and the hair collector are integrated equipment, they should not be installed repeatedly.;

3,When the circulating water pump has no backup pump, it is appropriate to set up a backup filter simple(frame)The

Two,fuzzy hairs The construction and material of the collector shall conform to the following provisions:

1,Internal filter cartridge(frame)hole (e.g. of sieve or colander)(Web-Eye (Windows video program))The total area of the inlet pipe shall not be less than the cross-sectional area of the inlet pipe receiver.2times and shall be subject to the following provisions:

1)When filter cartridges are used, the diameter of the orifice should not be larger than3.0mm;

2)When a mesh frame is used, the mesh should not be larger than15order (taxonomy);

3)filter cylinder(frame)The material should be corrosion resistant and not deformed.

2,The construction of the hair gatherer enclosure shall be simple and comply with the following provisions:

1)When carbon steel or cast iron is used, the internal and external surfaces should be treated against rust and corrosion.;

2)The top cover should be opened and closed flexibly and conveniently, and should be equipped with transparent observation windows.;

3)A venting device shall be provided and a vacuum pressure gauge is desirable.

3,The withstand pressure of the hair gatherer should not be less than0.40MPaThe

Three,The material of the hair collector which is integrated with the pool water circulation pump shall be the same as that of the pump body, and its internal structure shall be in accordance with the provisions of this Regulation.5.3.2The provisions of art.

And in the actual application of swimming pool water treatment system, you can also choose the swimming pool water pump with hair collector, such as Ollies swimming pool water pump, can also be equipped with a separate hair collector, more details can contact us Ollies 020-82686289Counseling.